L. A. Ornamental & Rack Corp 3708 NW 82nd Street Miami, Florida 33147 Office: 305-696-0419 Fax: 305-696-0461 |
About Us | Contact Us | Our Policies | FAQ | Manufactures | Links | Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. 3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com |
EMX VMD AC/DC Outdoor Buried Vehicle Motion Detector with Sensing Probe |
EMX VMD AC/DC Outdoor Buried Vehicle Motion Detector with Sensing Probe Engineered for ease of use, the VMD AC/DC provides a solution for many vehicle detection challenges. Where safety is an issue, the VMD detects moving vehicles in an industrial environment where there are blind areas along the driving path and actuates warning lights. Where security is an issue, the VMD detects approaching vehicles or an unauthorized movement of a parked vehicle and actuates alarms, video cameras or annunciator. For access control applications requiring free exit, the VMD detects vehicles for gates, overhead doors and parking barriers. Benefits include: Energy conservation Easy integration Easy upgrade or switch out to new devices EMX VMD AC/DC Outdoor Buried Vehicle Motion Detector with Sensing Probe Features Sensing probe is buried in the ground so that it is not noticed by a potential intruder or vandals. Is housed in a small 3.0” x 0.9” x 2.75” housing so it is easy to integrate with security control boards or gate and door operators. Has all the controls mounted on the front panel of the unit providing for easy access and operation. Low 4 mA standby current draw May be used with the EMX ULTRA II-MB or with the included LD-7P terminal block Surge protection EMX VMD AC/DC Outdoor Buried Vehicle Motion Detector with Sensing Probe Applications Safety detects moving vehicles in an industrial environment where there are blind areas along the driving path and actuates warning lights. Energy Conservation detects vehicles along a driving path and turns light on only in the proximity of the moving vehicle. Security detects approaching vehicles or an unauthorized movement of a parked vehicle and actuates alarms, video cameras or annunciator. Access Control (free exit) vehicle detector for gates, overhead doors and parking barriers. Driveway Annunciator may be tied to the doorbell announcing the approach of a vehicle entering the driveway. ORDERING INFROMATION VMD AC/DC 9-24 VDC 24 VAC LD-7P 7 position terminal block (included) ULTRA II-MB Accessory control add on board 130-10020316 ULTRA II MB mounting plate HAR-12-2 12 Pin Harness with 2 feet wire Probe-XX XX = Lead length (example Probe-50 = 50 foot lead) EMX VMD AC/DC Outdoor Buried Vehicle Motion Detector with Sensing Probe SPECIFICATIONS Range sensitivity 15 ft. diameter around probe (7.5 ft. radius) Sensitivity adjustment Dependent on mass and speed Output on time adjustment 0.5…6 seconds Surge protection Probe input circuitry protected by surge suppressors Relay output configuration Form C (SPDT) Relay contact rating 1A @ 24VDC, 1A @ 120VAC Detect indicator Red LED Power indicator Green LED Power 9…24VDC or 24VAC (do not exceed 35Vpeak) Standby current 4mA Detection current 50mA Operating temperature -40°C…82°C (-40°F…180°F) 0…95% relative humidity VMD™ housing material ABS (plastic) VMD™ dimensions (L x W x H) 3.0”(76mm) x 0.9”(22mm) x 2.75”(70mm) VMD™ weight 0.15 lbs. (68 g) Probe housing material PVC water-tight Probe dimensions (L x Dia.) 17” (432mm) x 1” (25mm) Probe cable 3-wire, shielded, direct burial |
The VMD draws 4 mA current in standby mode to help lower power needs for solar applications. Easier integration into security control panels or gate and door operators with the small 3.0” x 0.9” x 2.75” housing. All controls mounted on the front panel of the unit providing for easy access and operation. |
|
Step Two |
|
Step One |
***TO COMPLETE VMD PACKAGE, YOU MUST ADD A PROBE*** Must Choose Step 1 & Step 2 to Complete your order |
|
Diablo Loop Detectors |
EDI Loop Detectors |
Reno Loop Detectors |
EMX Loop Detectors |
Preform Loops |