|Features: All Made or Assemble in the U.S.A. Best Gate Openers and Operators For Residential,
Commercial Or Industrial Application. For pricing see below
|Model "SL" Slide Door Operator
Power Master Model “SL” operators are designed for use on
Supply PowerMaster Model “SL” Slide Door Operator(s) RATED
____ HP, ____ VOLTS, ____ PHASE, for use on Sliding Doors.
Primary reduction shall be by heavy duty V-Belt Drive.
Secondary reduction shall be a chain and sprocket
arrangement. Motor shall be continuous duty industrial type
protected from overload by a current sensing or thermal type
Motor shall be of the high starting torque, continuous duty
industrial type, protected from overload by a current sensing or
thermal type overload device. Motor controller shall be a heavy
duty, full voltage, across the line, magnetic reversing
contactor, that is mechanically and electrically interlocked.
Electrical components shall be installed in a NEMA 1 enclosure
integral to the operator. A
transformer shall be provided to reduce control voltage to 24
VAC. Separate terminal strips shall be provided for connection
of power supply line and all control devices. Operator shall be
wired for an open/close/stop control station. Control circuit
shall provide instant reverse motor wiring on 1Ø operators.
Positive chain driven, rotary type limit switches shall be
provided to limit full open and close
travel of door. Limit switch adjustment shall not be affected by
removal of motor or by manual operation of door.
|L. A. Ornamental & Rack Corp
3708 NW 82nd Street
Miami, Florida 33147
|An adjustable torque limiting clutch shall be provided to prevent overloading of the operator. A spring set solenoid released brake, and a disconnect arm for manual operation
of the door shall be provided in case of power failure. The final reduction and drive shall be heavy duty # 41 roller chain and sprockets. The drive shaft shall be supported by
pillow block bearings and be a minimum of ¾ In diameter.
•High Starting Torque Motor with Full Overload Protection
•Solid State Circuitry with Power and Program Feedback LED’s
•On Board Open/Close/Stop buttons for service and adjustments
•Terminals labeled and grouped by function
•Auto-Detect monitored photo beam for simplified installation
•Selectable Operating modes B2, C2, D1, E2, T, TS
•Field adjustable built in functions including: timer to close, mid-stop, delay on reverse, lock bar sensing, maximum run time, etc.
•For Use on Sliding Doors
•Heavy Duty V-Belt and Chain Reduction, Mechanically Self Locking
•Heavy Duty #41 Roller Chain Included
•Adjustable Torque Limiting Clutch
•Positive Chain Driven Rotary Limit Switches
•Manual Disconnect Arm for Operation of the Door in case of power failure
•Baked on Grey Powder Coat finish
|PowerMaster SL-51, 1/2 HP, 115V, 1 Phase, Heavy Duty V-Belt Drive Slide Door Operator||SL-51||Our Price: $1,251.78
|PowerMaster SL-52, 1/2 HP, 208V /230V , 1 Phase, Heavy Duty V-Belt Drive Slide Door Operator||SL-52||Our Price: $1,262.17
|PowerMaster SL-53, 1/2 HP, 208V /230V , 3 Phase, Heavy Duty V-Belt Drive Slide Door Operator||SL-53||Our Price: $1,293.34
|PowerMaster SL-54, 1/2 HP, 460V , 3 Phase, Heavy Duty V-Belt Drive Slide Door Operator||SL-54|| Our Price: $1,303.73
|PowerMaster SL-71, 3/4 HP, 115V, 1 Phase, Heavy Duty V-Belt Drive Slide Door Operator||SL-71||Our Price: $1,314.11
|PowerMaster SL-72, 3/4 HP, 208V /230V , 1 Phase, Heavy Duty V-Belt Drive Slide Door Operator||SL-72||Our Price: $1,324.50
|PowerMaster SL-73, 3/4 HP, 208V /230V , 3 Phase, Heavy Duty V-Belt Drive Slide Door Operator||SL-73||Our Price: $1,334.89
|PowerMaster SL-74, 3/4 HP, 460V , 3 Phase, Heavy Duty V-Belt Drive Slide Door Operator||SL-74||Our Price: $1,345.28
|PowerMaster SL-101, 1 HP, 115V, 1 Phase, Heavy Duty V-Belt Drive Slide Door Operator||SL-101||Our Price: $1,355.67
|PowerMaster SL-102, 1 HP, 208V /230V , 1 Phase, Heavy Duty V-Belt Drive Slide Door Operator||SL-102||Our Price: $1,370.21
|PowerMaster SL-103, 1 HP, 208V /230V , 3 Phase, Heavy Duty V-Belt Drive Slide Door Operator||SL-103||Our Price: $1,380.60
|PowerMaster SL-104, 1 HP, 460V , 3 Phase, Heavy Duty V-Belt Drive Slide Door Operator||SL-104||Our Price: $1,397.22