|L. A. Ornamental & Rack Corp
3708 NW 82nd Street
Miami, Florida 33147
|Electromechanical Automation For Rack Sliding Gates
•Incorporated two-channel rolling code radio receiver, plug-in
connector for connection of a second receiver.
•Control unit with self-learning and selfdiagnostic functions of
the parameters: brake, torque, obstruction detection.
•Control unit compatible with the EELink protocol.
•Thanks to the obstruction sensing device, the operator
reverses motion and prevents damage to people and vehicles in
the event of contact.
•Incorporated control unit positioned frontally for easier
•Control unit programming by LCD display.
• 24V DC and 120V AC electromechanical operators for
residential & commercial use for gate up to 1,100Lbs with Deimos
BT and 2,200Lbs with Icaro Fast.
• Electromechanical limit switches (magnetic as option) and
electronic slow down system on opening and closing.
• Control unit (QSC-D for Deimos BT and LEO D MA for Icaro fast)
with obstruction detection and built-in receiver.
• Opening time of 20 foot sliding gate: 30 seconds.
|Control panel||LEO D (incorporated)|
|Power supply||120 V 60 Hz single-phase|
|Absorbed power||1 hp (750 W)|
|Leaf speed||7.9 ips (12 m/min)|
|Output rotational speed||37 rpm|
|Pinion pitch||4 mm (25 teeth)|
|Impact reaction||electronic clutch with encoder|
|Manual release||mechanical release with knob|
|Operating cycle||intensive use|
|Environmental conditions||from 5°F (-15°C) to 140°F (+60°C)|
|Degree of protection||IP24|
|Operator weight||56 lb (~25 kg)|
|About Us | Contact Us | Our Policies | FAQ | Manufactures | Links |
Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form
or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp.
3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com