Receivers, Gate Opener Receivers, Gate Operators Radio Remote Receiver

Welcome to: GATESNFENCES.COM

L. A. Ornamental & Rack Corp
3708 NW 82nd Street
Miami, Florida 33147
Office: 305-696-0419
Fax: 305-696-0419

Keypads & Telephone
Entry Systems

Gate Operator Circuit
Boards

Remote Controls

Loop Detectors &
Safety Equipment

Recei vers

MultiCode 1011 Receiver Kit
The Multi-Code 1011 Multi Single is a
Multi-Code transmitter and receiver set.
The set contains one Model 308911
1-Channel Visor Transmitter and one
Model 109020 1-Channel Receiver.

MultiCode 109020 Receiver
The Multi-Code 109020 1-Channel Receiver
is designed for use in residential garage
door operator applications. Typically the
receiver mounts directly to the three
terminals on the door operator. An 11-inch
wire antenna extends from the receiver.

MultiCode 2022 Receiver Kit
The Multi-Code 2022 Multi Double is a
Multi-Code transmitter and receiver set.
The set contains two Model 308911
1-Channel Visor Transmitters and one
Model 109020 1-Channel Receiver.

MultiCode 109920 Receiver
The Multi-Code 109920 1-Channel, 110V,
Gate Receiver is designed for use in gate
operator applications. An 11-inch wire whip
antenna is included for local reception. The
whip antenna connects to the receiver's
Type-F antenna connector.

MultiCode 302101 Receiver
The Multi-Code 302101 2-Channel
Heavy-Duty Gate Receiver is designed for
use in gate operator applications. The
receiver is housed in a heavy-duty metal
cabinet. The cabinet meets NEMA 13 and
JIC specifications and features a sealed
strain relief bushing for wiring

MultiCode 302850 Receiver
The Multi-Code 302850 2-Channel, 12-24V,
Gate Receiver is designed for use in gate
operator applications. An 11-inch wire whip
antenna is included for local reception. The
whip antenna connects to the receiver's
Type-F antenna connector.

MultiCode 109950 Receiver
The Multi-Code 109950 is a dual
frequency receiver. An internal jumper
selects either 300 MHz or 310 MHz
operating frequency. The 300 MHz
frequency is compatible with standard
Multi-Code transmitters, the 310 MHz
frequency is compatible with the Stanley
version Multi-Code transmitters.

MultiCode 309013 Receiver
The Multi-Code 309013 1-Channel Receiver
is designed for use in residential garage
door operator applications. Typically the
receiver mounts directly to the three
terminals on the door operator. An 11-inch
wire antenna extends from the receiver.

MultiCode 105104 Receiver
The Multi-Code 105104 Gate Safety Edge
Transmitter is for adding obstacle sensing
for motorized gates or barrier arms. Using
a safety edge transmitter is more
economical and discrete than the
traditional coiled cord connection method.

Multi-Code 302210 Gate
Safety Edge
Transmitter is for adding obstacle sensing
for motorized gates or barrier arms. Using a
safety edge transmitter is more economical
and discrete than the traditional coiled cord
connection method.

Delta 3 GRD Receiver
The Delta 3 GRD is a 1-Channel Gate Receiver
designed for use with automatic gate operators
or systems where a remote antenna is needed.
The receiver uses the Delta-3 radio format, with
256 possible codes, set by dipswitch.

Delta 3 GRD-2 Receiver
The Delta 3 GRD-2 is a 2-channel Gate
Receiver designed for use with automatic gate
operators or systems where a remote antenna is
needed. The GRD-2 can operate two gates, one
gate and an obstacle sensor, or channel one
can open the gate and channel two can close
the gate. The receiver uses the Delta-3 radio
format, with 256 possible codes for each
channel, set by dipswitch.

Liftmaster 312HM Receiver
The Liftmaster® 312HM receiver operates at
315mhz and is used to access automatic doors,
garage doors, and gates. The 312HM model is
compatible with LiftMaster® 300 series products.

Liftmaster 412HM Receiver
The Liftmaster® 412HM receiver operates at
390mhz and is used to access automatic
doors, garage doors, and gates. The 412HM
model is compatible with LiftMaster® wireless
and Liftmaster® Security+ wireless products

Liftmaster 6 35LM Receiver
The Liftmaster 635LM Wall Mounted Receiver.
Security+ technology, replaces pre-1983
receivers with discontinued transmitters.
Easy to install, simply use your existing wall
buttons' wires and plug into a wall outlet, that's it!
Over 100 billion possible codes using Security+
remotes, however, this item will accept ALL older
remotes as well.

Liftmaster 365LM Receiver
The Liftmaster 365LM-1T Plug-In Receiver
and Transmitter Set. Opener receiver and
transmitter set with Enhanced Radio
Technology (ERT), replaces LiftMaster 315
MHz receivers with discontinued remotes
(includes 1 receiver and 1 transmitter
Easy to install, simply use your existing wall
buttons' wires and plug into a wall outlet, that's
it!

Liftmaster Star250 Receiver
The Liftmaster STAR 250 Receiver for gate and
commercial operators, and residential garage
door openers. Ideal for gated communities,
parking lots and garages, it can easily add, block
and delete as many as 250 transmitters
individually. comes in a compact size that is
designed to fit inside most gate operators and is
available with an optional weatherproof box.

Liftmaster 423LM Receiver
The LiftMaster 423LM Three Channel High
Memory Coaxial Receiver can be used with a
multi-function remote control to operate three
residential garage door openers or with a
three-button transmitter to Open, Close or
Stop a single garage door opener.

Liftmaster TCG-1 Receiver
The Liftmaster Chamberlain TCG-1 Tri-Code
Receiver 1 Channel Gate is a Single-channel
commercial receiver with 1 x 10 pole Dip,
3-position slide switch. Weather-resistant
housing suited for outdoor applications. Quarter
turn screws for quick and easy programming.

Liftmaster TCG-2 Receiver
The Liftmaster Chamberlain TCG-2 Tri-Code
Receiver 2 Channel Gate is a Two-channel
commercial receiver with 2 x 10 pole Dip,
3-position slide switch. Weather-resistant
housing suited for outdoor applications.
Quarter turn screws for quick and easy
programming.

Liftmaster TCR-2 Receiver
The Chamberlain TCR-2 Tricode 2 Channel
Receiver is compatible with Multi Code 1090,
Stanley and Linear Delta-3 and DR systems.
Operates 300mhz and 310mhz dip switch style
garage door openers.

Liftmaster TCR-1 Receiver
The Chamberlain TCR-1 Tricode One Channel
Receiver is compatible with Multi Code 1090,
Stanley and Linear Delta-3 and DR systems.
Operates 300mhz and 310mhz dip switch style
garage door openers.

Liftmaster STAR 450 Receiver
315Mhz or 390 Mhz
Compact size; easy to program
Reduces installation time; compact design fits
inside most gate operators. Universal receiver
with antenna. Rapid Learn® feature programs
multiple transmitters in just seconds.

Liftmaster CPWR3 Passport
Receiver: 315Mhz or 390Mhz
Works with 1, 2, 3 and 4-button remotes
Works with 1, 2-button mini key-chain remotes
Uses the Wiegand format which easily
integrates with telephone entry and access
control systems using 26 and 30-bit formats

Heddolf M924-2K 300 MHz Universal
Garage Door Opener Receiver
Size : 4 ½’ x 3 ½’
Controls two door operator’s with one
receiver.
Switchable between 12 and 24 Volt
Switchable relay from pulse to continuous
Compatible with Multi , Elmac 300 Frequency
systems
Codes using 9 dip switches with 2
positions each. (on/off)
Both F connector & wire standard.

Heddolf M294-1K 300 MHz Universal
Garage Door Opener Receiver
Size : 4 ½’ x 3 ½’
Receiver with wires used with gate operators
Switchable between 12 and 24 Volt
Switchable relay from pulse to continuous
Compatible with Multi Elmac 300 Frequency
systems
Codes using 10 dip switches with 2
positions each. (on/off)
Both F connector & wire standard

Heddolf P294-1KA 318 MHz Universal
Garage Door Opener Receiver
Size : 4 ½’ x 3 ½’
Receiver with spades used with garage door
Switchable between 12 and 24 Volt
Switchable relay from pulse to continuous
Compatible with Allstar and Pulsar 318
Frequency systems
Codes using 9 dip switches with 3 positions
each. (+/0/-)
Both F connector & wire standard

Heddolf ER294-1K 433.92 MHz Gate or
Garage Door Opener Remote Receiver
Size : 4 ½’ x 3 ½’ (4’ including mounting tabs)
x 1 ¼’
Switchable between 12 and 24 Volt
Codes using 10DS 3 position (+/0/-)
Receiver with wires used with gate operators
Works consistently at 1,500FT

About Us | Contact Us | Our Policies | FAQ | Manufactures | Links |
Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form
or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp.
3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com

Linear AM-RRR Remote
Radio Receiver
The Model AM-RRR Remote Radio Receiver is
designed for use with Linear's access control
systems. The AM-RRR functions as a remote
device that extends the radio range or supplies
localized radio reception.
Three antenna types can be used with this
receiver.

Linear AM-RPR Remote
Proximity Receiver
The Model AM-RPR Remote Proximity Receiver is
designed for use with Linear's access control
systems. The AM-RPR functions as a remote device
that supplies localized radio reception.
In a typical installation, the AM-RPR would be
mounted in a plastic single-gang electrical box next
to the controlled opening.

Linear RGR Remote Genie
Receiver
The Model RGR Remote Genie Receiver is
designed for use with Linear's AE1000Plus,
AE2000Plus, and AM3Plus access control
systems. The RGR functions as a remote device
that supports reception of Linear's GT-30 and
GT-31 transmitters.

Linear WOR Wiegand Output
Receiver
The Model WOR Wiegand Output Receiver is
designed for use as an access control interface for
Linear's block coded digital transmitters. The unit
receives signals from transmitters, adds a facility
code to the data, and sends the information to the
Wiegand input of the access control panel via a
5-wire connection.

Linear AP-5 Access
Controller
Dual-portal access control system, built-in
radio receiver, supports 480 block coded
transmitters or 238 individual
transmitters/wireless keypad entry codes
and six MGT obstacle transmitters, three
relays, programmable access or obstacle
output

Linear AP-4 Gate Access
Receiver
Ideal for gated communities, parking
facilities, and industrial sites.
Easy to set-up and use — up to 480
remotes can be programmed with a few
keystrokes.
Easy to add, suspend, and delete
transmitters through programming mode —
no transmitter dip switches to set.

Doorking 8054-081 Micro-Plus
Receivers
Stand-alone receiver.
Stores up to 1250 transmitter codes
2300 event transaction buffer.
Output for serial printer.
10 programmable time zones.
Built-in clock / calendar.
Programming keypad.
Form C relay.
12-24 volt, AC or DC.
Model 8054 Receiver Memory: 50, 100, 250,
500, 1000, 1250

Doorking 8057-081 Micro-Plus
Receivers
Designed for multi-user stand-alone
applications
Can store up to 16000 transmitter codes
Uses 8066-080, 8067-080 and 8068-080
transmitters, includes batteries, 318MHz
Single Pole relay
Built-in programming keypad for adding and
deleting individual codes
Model 8057 Receiver Memory: 50, 100,
250, 500, 1000, 5000, 16000

Doorking 8055 Receiver: Stand-alone
receiver can support up to 40 transmitters.
Programming is by means of the receiver “learn”
method. Individual transmitter codes cannot be
deleted from this receiver.

GTO AQ201 Receiver Assembly
with Antenna
Compatible with all GTO DC gate operators and
narrow band transmitters (gray style). The
AQ201-NB comes standard with all DC swing
gate operators

Interior OR Exterior Application 10 ft to 100ft

GTO AQ202 Receiver Assembly
with Antenna
The AQ202-NB comes standard with all DC slide
gate operators. Measures 2"H x 2-3/8"W x
15/16"D, with a 10" antenna

Interior OR Exterior Application 10 ft to 100ft

GTO RB709 UNB Universal
Receiver
Compatible with all GTO AC gate operators and
narrow band transmitters. The RB709U-NB is
recommended for all GTO AC gate operators.
Measures 3-1/2"H x 2-3/8"W x 1-1/2"D, with a
11" antenna and 10' cable

Mega-Code MDRG Receiver
MegaCode series of digital receivers are
wireless radio controls designed for use with
automatic gate openers. The MegaCode radio
format provides unparalleled security. The
transmitter and receiver can be programmed
to more than a million different codes

Mega-Code MGR Receiver
Linear Mega Code MGR is a 1-Channel Gate
Receiver designed for use with automatic gate
operators or systems where a remote antenna
is needed. The receiver uses the MegaCode
radio format with over a million possible code
combinations

Hedd ol f

GTO