BFT Ares Operator
THE SLIDING GATE OPERATOR OFFER IS
NOW EVEN WIDER
•ARES 1000 and ARES 1500 operator widen
the BFT range of sliding gate operators.
Classed amongst the “medium-heavy” weight
range, they integrate with existing products to
obtain an operator that is perfectly suited to
the gate every time.
|
LOW VOLTAGE MOTOR
•The 24 V electrical motor guarantees maximum accuracy in
torque and speed control on the one hand, and on the other
makes it suitable for intensive gate use, even in industrial
installations.
•Optional battery back-up can be fitted within the operator
casing.
|
BFT Deimos Operator
SMART TECHNOLOGY
•Electromechanical microswitches that control
the end of stroke.
•Incorporated two-channel rolling code radio
receiver.
•Control unit with self-learning and self-
diagnostic functions.
•Control unit compatible with the EELink
protocol.
|
SAFE USE
•This version powered at 24 V has been specially designed
for simpler and faster installation in compliance with latest
safety standards.
•Thanks to the obstruction sensing device, the operator
reverses motion and prevents damage to people and
vehicles in the event of contact.
|
BFT E5 Operator -
A MODEL FOR EVERY NEED
•Multiple installation possibilities thanks to the
optional articulated arms (BLE5 or BSE5)
which allow the use of the operator on a pillar
or in very tight spaces
|
SAFE USE
•Crushing prevention guaranteed by the adjustable
mechanical clutch.
For swing gates up to 440 lb (200 kg) and 6’ 6’’(2 m)
|
BFT Icaro Operator
SMART TECHNOLOGY
•Incorporated two-channel rolling code radio
receiver, plug-in connector for connection of a
second receiver.
•Control unit with self-learning and
selfdiagnostic functions of the parameters:
brake, torque, obstruction detection.
•Control unit compatible with the EELink
protocol.
|
SAFE USE
•Thanks to the obstruction sensing device, the operator
reverses motion and prevents damage to people and
vehicles in the event of contact.
For sliding gates up to 2200 lb (1000 kg)
|
BFT Igea Operator
A MODEL FOR EVERY NEED
•Great versatility thanks to the levers that
permit installation on large sized pillars,
opening up to 125°. Maximum offset 12” (30
cm).
SMART TECHNOLOGY
•Control unit compatible with the EELink
protocol.
|
SAFE USE
•This version powered at 24V is specially designed for
simpler and faster installation in compliance with latest
safety standards.
•Thanks to the antisquashing system, the operator reverses
motion and prevents damage to people and vehicles in the
event of contact.
For swing gates up to 550 lb (250 kg) and 10' (3 m)
|
BFT Joint Operator -
SMART TECNOLOGY
•The large anti-shearing arms allow
installation on columns with angles up to
125°.
|
SAFE USE
•Quick and easy manual release.
•Adjustable limit switches.
•Maximum recommended offset 12” (could go to 18”).
For swing gates up to 550 lb (250 kg) and 10' (3 m)
|
BFT LUX Operator -
A MODEL FOR EVERY NEED
•Several versions available: with slowdown,
internal positive stops, longer stroke. All of
them are irreversible.
|
SAFE USE
•Crushing prevention guaranteed by two adjustable bypass
valves.
For swing gates up to 700 lb (320 kg) and 15' (4,5 m)
|
BFT LUX BT Operator -
A MODEL FOR EVERY NEED
•Several versions available: with slowdown,
internal positive stops, longer stroke. All of
them are irreversible.
|
SAFE USE
•Crushing prevention guaranteed by two adjustable bypass
valves.
For swing gates up to 1750 lb (800 kg) and 16’ (5 m)
|
BFT Moovi Operator -
A MODEL FOR EVERY NEED
•Available in two versions, for both 120V AC
and 24V DC. Openings from 10’ (3 m) to 16’6’’
(5 m) and speeds from 2,5 to 8 s.
•Can be equipped with a wide range of
accessories.
|
SMART TECHNOLOGY
•Internal cool-down system.
•Fast release with personalised key.
•Pre-drilled frame to allow simpler installation of the
accessories.
•New heater is available for use in cold environment.
|
BFT Michelangelo Operator
A MODEL FOR EVERY NEED
•Possibility of closing passages up to 8 m.
SMART TECHNOLOGY
•Electronic adjustment of the limit switches.
•The new position of the control panel makes
it possible to operate in a vertical position.
|
A MODEL FOR EVERY NEED
•Possibility of closing passages up to 8 m.
SMART TECHNOLOGY
•Electronic adjustment of the limit switches.
•The new position of the control panel makes it possible to
operate in a vertical position.
SAFE USE
•The barrier features a very stout structure to guarantee
greater protection from vandal attacks and constant
reliability in use.
|
BFT P7 - P4,5 Operator -
A MODEL FOR EVERY NEED
•Two versions available, one for gates with
leaves up to 15’ (4.5 m) and one for leaves up
to 23’ (7 m).
SMART TECHNOLOGY
•Adjustable slowdown when closing.
•Customized release key.
|
SAFE USE
•Crushing prevention guaranteed by two adjustable bypass
valves.
For swing gates up to 1100 lb (500 kg) and 23’ (7 m)
|
BFT Phobos Operator -
SMART TECHNOLOGY
•Control unit compatible with the EELink
protocol
|
SAFE USE
•This version powered at 24 V has been specially designed
for simpler and faster installation in compliance with latest
safety standards.
•Thanks to the obstruction sensing device, the operator
reverses motion and prevents damage to people and
vehicles in the event of contact.
For swing gates up to 550 lb (250 kg) and 10' (3 m)
|
BFT Virgo Operator -
A MODEL FOR EVERY NEED
•Great versatility thanks to the levers that
permit installation on columns for opening up
to 120°. Maximum offset 8” (20 cm).
|
SMART TECHNOLOGY
•Incorporated positive stops and adjustable electric limit
switches.
•Separate programming of the two motors.
•Control unit with self-learning and selfdiagnostic functions.
•Quick delayed motor reversing.
•Control unit compatible with the EELink protocol.
For swing gates up to 440 lb (200 kg) and 6'6" (2 m)
|
BFT SP4000 Operator
SMART TECHNOLOGY
•Hydrodynamic joint for smooth gate starts
and stops.
|
SAFE USE
•The strength and compactness of the structure guarantee
the maximum reliability of operation over time.
•The operator makes it possible to automate any type of
gate, even the heaviest.
For sliding gates up to 8800 lbs (~4000 kg)
|
BFT SUB Operator
A MODEL FOR EVERY NEED
•Two versions available, for 125° and 180°
opening angles.
SAFE USE
•Crushing protection guaranteed by two
adjustable bypass valves.
|
SIMPLER INSTALLATION
•Maintenance is carried out without any need to raise or
disassemble the gate.
•The special foundation case makes it possible to remove
the operator without taking off the gate leaf.
For swing gates up to 1750 lb (800 kg) and up to 11’6’’ (3.5
m)
|
