| PayPal Verified |
| L. A. Ornamental & Rack Corp3708 NW 82nd Street Miami, Florida 33147 Office: 305-696-0419 Fax: 305-696-0419 |
| Power Master ( PowerMaster ) GSMCB02 Main Electronic Control Board: This is for the Residential units Gate Opener Power Master the new model. Model # of this Circuit Board is GSMCB02 a much larger board than previous boards and also UL approved. For the SG Heavy commercial units the model # GSMCB01 was used, make sure to match the model # |
| Power Master SS12TPU Falcon Control Main Circuit Electronic Board: This Falcon Main Control Electronic Circuit Board was use in Power Master Gate Openers. The model # of the boards is SS12TPU which actually re-places several of the SSTPU series-- and now has been replace by SSTPU12. Unless your board matches exactly e-mail us for verification prior to ordering |
| Power Master SS6TPU | Falcon Circuit Gate Control Electronic Main Board: This Falcon Main Control Electronic Circuit Board are use in Power Master Gate Operators. This Board Has Been Re-place By Falcon SS10PTU Board and the SS10TPU has been Re-place by the SS12TPU |
| Power Master Main Control Board Circuit Board New Power Master GSMCB01: This Power Master Main Control board is found on the large Gate Operators, Most of the Commercial Gate Openers have this Circuit. Look to make sure that you order the correct Board. The GSMCB01 look almost the same as GSMCB02 but the GSMCB01 is for the most part for the commercial units |
| Power Master | PowerMaster PBR2-PRB3- PBRSS Electronic Circuit Main Control Board: This Main Circuit Board took the place of the PRB2 and the PRB3 This Electronic Main Circuit Control Gate Board were found in the older Model of Power Master Gate Openers. The PRB3 was re-place in the newer models but now are also discontinued and have been replace by this new board the PBRSS.if your operator is equipt with the PBR2 OR the PBR3 then this board is the one your opener needs. |
| Allstar - Larko Leader LP 1000 Circuit Board | Larko Leader Main Control Electronic Board: Larko Leader LP1000 Main Control Electronic Board will work on All ( Most ) Larko Leader Gate Openers This Circuit Board is very similar to the Board that is use by Power Master Gate Operator so be careful and look at every detail. |
| Power Master Electronic Main Control Circuit Board SS7: This Power Master Main Circuit Control Board Model # SS7 OR SS7-C is still available and use in some door products. The SS7-C is for direct motor drive applications (NO CONTACTOR). |
| Power Master Main Control Board V-E Barcon P1500 P5000: Power Master Main Control : Openers and the P5000 Gate OperatorsOpeners and the P5000 Gate Operators |
| Elite Onmi Board | Elite Q019 | Old Omni Control Board | Elite Electronic Board: This Elite Control Electronic Circuit Board # Q019 is the Old Omni Circuit Board Please make sure this is the Board that you need there is no returns on Electronic Equipment |
| Elite Circuit Board | Elite Q023 | Miracle Arm Board | Miracle Main Board: This Electronic Board is the original Board for the Miracle Gate Opener- There are 2 style of board this one is to operate a single arm gate. If you want the dual gate this WILL NOT be the Board to Order. |
| Elite Gate Opener | Elite Omni Circuit Board | Elite Q400: This Is the Elite Q400 is the most common Main Electronic Circuit Board that are use with the Elite line of Gate Openers and Gate Operators, There is another Elite Omni board please make sure you select the correct one. This Board Should fit most of the Elite line of gate openers make sure that they are exact as the Circuit Board that you are replacing. Electronic parts are not returnable. |
| Robo Slide Circuit Board | Robo Swing Electronic Board | Elite Control Bord | Elite Q206: This Electronic Main Circuit Board is for The Elite Gate Opener Robo Slide also the Elite Robo Swing. Look at the Board and make sure is the correct one must board look similar make sure you have selected the correct board for your gate opener |
| LiftMaster ( Lift Master ) Mega Arm Circuit Electronic Board MA-001: This Circuit Board is found on the LiftMaster ( Lift-Master ) Mega Arm Barrier Model # MA001 |
| Falcon Timing Board | Power Master Gate Timer Circuit Board ACT: This Falcon Timer is use in conjunction with several of the Power Master Gate Openers Main Control Boards and is use as a timer. Model # ACTW3C Falcon Board |
| Eagle Diamond Board | Eagle Electronic Board | Eagle Main Circuit Board | Gate Opener Board: The Eagle Diamond Control Board is for all Eagle Gate Operators ( Gate Openers ) whether you have a Sliding Gate Opener Or A swing Gate Opener If is a Eagle The control Board Should be The Diamond Board. Inspect the Board carefully there is no returns on Electronic Equipment. |
| SEA PRO Board OLD Gate SEA Main Circuit Control Electronic Board This is the older version of the Pro Board Gate2 That was use in the SEA Gate Openers. This Board look almost the same as the newer model look at the terminal to spot the difference |
| Ramset Main Circuit Board Electronic Control Board Intelligent: The "Intelligent" features: Re-programmable microprocessor: Allows control boards to be updated. LED diagnostics: LED (red lights) show the status of the control board at all times. 3-Button station: Easy connection plug (included) for 3-button stations. Status relays: Triggers relays when the gate is fully open or fully closed. Plug-in loop detectors: Allows ILD-24 plug-in loop detectors (sold separately) to be used, eliminating messy wire connections. The control board is powered by a 24VAC transformer (sold separately). This allows no necessary board modifications between 110VAC and 220VAC single-phase applications. |
| SEA Gate || Electronic Circuit Board | SEA Pro-Board: This SEA Gate Opener Main Circuit Board is very similar to the old SEA Pro Board, it is hard to distinguish but look close to the terminals |
| DISCOUNTINUED: This Circuit Board SEA ORION has been discontinued we do have 2 at the time of listing this item DON'T BUY CONTACT US TO SEE IF WE STILL HAVE IT AVAILABLE |
| SEA Taurus Board | SEA Control Board | SEA Main Circuit Board | Taurus Board : The SEA Gate Openers use several different Boards for there equipment and they all look similar so be careful when making your selection. This is for the Taurus Model but the also make the Gate1-Gate2 Pro-Board. |
| SEA Gate 1 Board | SEA Electronic Board | SEA Circuit Board |SEA Control Main Board. All the SEA Board they look similar so be careful when comparing to make sure that you pick the correct one |
| Bravo Board | Bravo Control Board | Bravo Main Board | Bravo Electronic Board: Bravo Power Board for controlling Gate Operators |
| Crusader Circuit Board R200A Crusader Main Electronic Replacement Board - Main Control Circuit Board for Crusader was the first Board use on the 200 series |
| Crusader Main Control Electronic Circuit Board | Crusader R200 Circuit Board: This Main Control Circuit Board for Crusader was the second Board use on the 200 series, the part # is R200, previous the Crusader use the R200A . |
| Viper Gate Opener Board | Viper Electronic Board | Viper Control Board | Viper Main Board |
| Crusader C300 Control Board | Crusader Circuit Board | Electronic Board: This is the Electronic Control Board for the Crusader 300 the C300 stand for Commercial Operator by Crusader there is only one board for the Commercial Gate Opener for Crusader |
| Victory Board | Victory Circuit Board | Victory Control Main Board: Victory Board is for the Victory Gate Opener, this board is on a Imported Gate Operator |
| Eagle 1 Board-Main Circuit Board-Eagle One Gate Opener Board: The Eagle-I Mini Board uses similar technology as the diamond board, with all the necessary features for residential applications with a lower cost. Control Board. The Unique Control Board uses state of the art technology combined with ease of use to provide many exceptional features not found in any other board 2 Wire Maser/Slave - The board uses a unique Master/Slave system that requires only two wires. Outputs include on board 24 VDC for MAG Lock, alarm, and 24 VAC auxiliary power. |
Gate Opeenr Circuit Boards, Gate Operator Control Boards for most major brands of gate openers,
some of these Electronic boards have either been re-placed or are discontinued. If labeled re-placed
then the unit is compatible with the original board, if labeled discontinued it's NOT AVAILABLE any
longer. Some might be labeled retro fit, this boards are kits to be adapted and some knowledge for
installation would be required.
some of these Electronic boards have either been re-placed or are discontinued. If labeled re-placed
then the unit is compatible with the original board, if labeled discontinued it's NOT AVAILABLE any
longer. Some might be labeled retro fit, this boards are kits to be adapted and some knowledge for
installation would be required.
| OSCO Solid State Circuit Board OSCO Solid State Circuit Board 2510-268 with 2500-1980 3 Phase Board on Top - Can Order Circuit Board with 3 Phase Motor Drive Board model # 2510-295 |
| OSCO Solid State Circuit Board BGU uses 2510-270 Circuit Board with 2500-1946 AC Motor Drive Board on Top. Can order Both Model # 2510-246 BGU-D uses 2150-271 Circuit Board with 2500-1947 DC Motor Drive Board on Top. Can Order both Model # 2510-247 |
| OSCO APEX Controller Board The APeX™ is currently available on the OSCO slide gate models (SLC, SLR and SLD) and swing gate models (SWC, SWR and SWD). Throughout 2008, the APeX™ controller will be introduced to the rest of the Linear/OSCO gate operator product line, including barrier gates (BGU, BGU-D, BGUS and SG), variable speed industrial swing gate operators (VS-GSWG), commercial/industrial slide gate operators (HSLG, GSLG-A), and variable speed industrial slide gate operators (VS-GSLG). |
| DoorKing Main Control Board 4602-010. This Circuit Board works on Gate Operator models 9100 and 9150 |
| About Us | Contact Us | Our Policies | FAQ | Manufactures | Links | Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. 3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |