|L. A. Ornamental & Rack Corp
3708 NW 82nd Street
Miami, Florida 33147
|About Us | Contact Us | Our Policies | FAQ | Manufactures | Links |
Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be
reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written
consent of L. A. Ornamental & Rack Corp.
3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com
|Multi-Code 109920 1-Channel, 110V, Gate Receiver is designed for use in gate
operator applications. An 11-inch wire whip antenna is included for local
reception. The whip antenna connects to the receiver's Type-F antenna
|Multi-Code 109920: 1-Channel 110V Gate Receiver
The Model Multi-Code 109920 1-Channel, 110V, Gate Receiver is designed for use in gate operator applications. An
11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F
antenna connector. If the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing, an
external Model 106603 Remote Whip Antenna should be used.
The receiver includes a 24-volt AC power transformer that plugs directly into a 115 VAC power outlet. The normally
open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for
attachment to the gate operator's radio activation terminals.
The receiver is programmed with a 10-position coding switch. When a Multi-Code transmitter set to the same code is
activated, the receiver's output will activate, triggering the gate operator.
The Model Multi-Code 109920 is compatible with 300 MHz Multi-Code transmitters only.
Operates on 115 VAC power
RF frequency: 300 MHz
3.625" W x 5.25" H x 1.5" D
Order number: MCS109920