|L. A. Ornamental & Rack Corp
3708 NW 82nd Street
Miami, Florida 33147
|About Us | Contact Us | Our Policies | FAQ | Manufactures | Links |
Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be
reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written
consent of L. A. Ornamental & Rack Corp.
3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com
|Multi-Code 302850 2-Channel, 12-24V, Gate Receiver is designed for use
in gate operator applications. An 11-inch wire whip antenna is included for
local reception. The whip antenna connects to the receiver's Type-F
|Multi-Code 302850: 2-Channel 12-24V Gate Receiver
The Model Mulit-Code 302850 2-Channel, 12-24V, Gate Receiver is designed for use in gate operator applications. An
11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna
connector. Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in
installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An
external Model 106603 Remote Whip Antenna can also be used with this receiver.
The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating
frequency. The 300 MHz frequency is compatible with standard Multi-Code transmitters, the 310 MHz frequency is
compatible with the Stanley version Multi-Code transmitters.
The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power
transformer or DC power supply. The normally open relay outputs can switch up to 1 amp @ 30 VAC. 3-foot,
2-conductor wire leads with spade lugs are provided for attachment to the gate operator's radio activation terminals.
The receiver is programmed with a 9-position coding switch. When a transmitter set to the same code is activated, the
receiver's output will activate, triggering the gate operator. Transmitter switch #10 selects which receiver channel will
The Model Multi-Code 302850 is compatible with Multi-Code and Stanley Multi-Code transmitters only.
Operates on 12-24 volts AC or DC power
3-foot antenna coax and bulkhead connector
RF frequency: 300 MHz or 310 MHz (jumper selectable)
3.625" W x 5.25" H x 1.5" D
Order number: MCS302850