L.A. Ornamental & Rack Corp. |
L. A. Ornamental & Rack Corp3708 NW 82nd Street Miami, Florida 33147 Office: 305-696-0419 Fax: 305-696-0461 |
The Allstar Gate Star GSX1000 Vehicular Gate Operator or Gate Openers will provide convenience and assurance to the ultimate users for many years. It is ruggedly built of the finest materials and has been thoroughly inspected and tested at the factory. It has many features that will aid in the installation and testing of the complete gate system. The GSX1000 is certified to comply with UL Standard for Safety 325 |
The Allstar GSX1000 slide gate operator or gate openers is designated a Class I Residential Vehicular Slide Gate Operator and is intended to operate a vehicular slide gate installed on a residential home, maximum of four single families in the dwelling, or a garage or parking area associated with such a home. The GSX1000 vehicular gate operator is also designated Class II (commercial location or multi-family home); III (industrial location not intended to service the general public); and IV (secure or restricted access locations, i.e. airports and prisons). THE GSX1000 MAY BE USED IN ANY CLASS LOCATION. Because the GSX1000 (as well as gate operators sold by other manufacturers) is designed to start and move gates weighing as much as 1200 pounds, or more,---the GSX1000 is capable of producing high levels of force. It is important in the design of the total gate system that designers, installers and users be aware of the hazards that may be associated with the IMPROPER design, installation and use of vehicular gate systems and gate operators. The gate openers is only one part of a complete automatic gate operating system. As each location and usage is different, a properly designed system will include all applicable safety devices. |
Allstar GSX1000 - Heavy Duty Vehicular Slide Gate Operator |
Allstar GATE STAR 1000 HS High Speed Slide Gate Operator or Openers Features Maximum Gate Length 25 Feet. Maximum Gate Weight: 800 Pounds. CGA2K™ Technology UL325 & UL991 Listed Rated for Continuous Duty at a 2 Foot per Second Gate Speed Super-Efficient, Non-Slip Timing Belt Drive Heavy, Key-Lock Steel Cover Cam-Driven Switches for Limits Built-In Solenoid-Actuated Lock Keyed Disconnect for Manual Operation of Gate in Case of Power Failure Built-In Maximum Run Timer for Added Safety Built-In Adjustable Auto-Close Timer Built-In Master/Slave Capability 13 Diagnostic LED's for Easy Service Easy Conversion Right-Hand/Left-Hand Drive Reinforced, Welded and Powder Painted Uni-Body Frame #50 Steel Roller Chain Allstar Gate Openers CGA2K™ Technology Standard Features UL325 & 991 Listed Independently Adjustable Open & Close Inherent Anti-Entrapment System Selectable Control by an Additional Operator (Master/Slave) Adjustable Auto-Close Timer (off, 2-60 seconds) Self-Adjusting Maximum Run Timer Detected Entrapment Alarm Test Mode for Installation Adjustments Electronic (Dynamic) Braking Secure-Safe™ Pushbutton Control (patent pending) Factory Installed MVP Radio Receiver Factory Installed Sockets for plug-in Loop Detectors Separate Inputs for: Access Control Devices (Pushbuttons, Radio Controls, Entry Systems and Loop Detectors) Non-Contact Anti-Entrapment Sensors (Photo beams) Contact Anti-Entrapment Sensors (Electric Edges) Options Radio Control Transmitters Standby Power Supply (battery backup) Chain Disconnect Drop-Out Lock (Model GS 1000 HS DOL) Photo beams Electric Edges 220V Operation |
|
About Us | Contact Us | Our Policies | FAQ | Manufactures | Links | Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. |