|DoorKing Gate Opener 6400 Under Ground Residential Gate Opener Swing Gate Operator
17"W x 6"H x 12"L
|THE MODEL 6400 installs underground making it virtually invisible and satisfies the most sophisticated automation needs without being
detrimental to the original gate design. Invisible and powerful, the motor/drive mechanism is constructed in die-cast aluminum with a
special corrosion-proof treatment, and because the drive unit is gear driven, there is no need to worry about hydraulic leaks, check
valves or pumps. The underground self-supporting foundation box is built from corrosion-proof steel and has a galvanized steel cover.
A lockable manual release lever is designed so that it can be operated from inside or outside the gate.
|The 6400 features built in limit switches that precisely control the start / stop speed, and travel of your gate. The microprocessor based electronic control
board provides many advanced features typically not found in operators in this class, and with a 24 volt DC operating voltage, the 6400 is ideal for residential
Internal adjustable limit switches.
Slow start / slow stop.
Overlap feature for dual swing gate operation.
Magnetic lock output.
Ports for plug-in loop detectors.
120 VAC input power. 24 VDC operating power.
Built-in battery back-up.
Separate control panel.
Keyed release for manual operation.
Maximum gate width 10-feet.
Maximum gate weight 300 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may
affect the performance of the gate operator. )
Actuator operates at 24 Volts DC power.
Class I applications.
Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention
devices need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on
current industry safety standards.)
Dimensions (operator only): 17"W x 6"H x 12"L
Dimensions (deluxe control box): 12.25"W x 24.25"H x 4.25"D
Dimensions (standard control box): 12.25"W x 16.25"H x 4.25"D
OPTIONS AVAILABLE WITH THIS OPERATOR
Bi-parting gate connection cable.
Magnetic gate lock.
Plug-in loop detectors.
12.25"W x 4.25"D x 16.25" or 24.25"H
|plug-in loop detectors
simplify installation and are
used for vehicle protection.
|wired with XLPE insulated wire
and are placed in the roadway
prior to concrete being poured.
|About Us | Contact Us | Our Policies | FAQ | Manufactures | Links |
Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form
or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp.
3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com
|L. A. Ornamental & Rack Corp
3708 NW 82nd Street
Miami, Florida 33147