L. A. Ornamental & Rack Corp 3708 NW 82nd Street Miami, Florida 33147 Office: 305-696-0419 Fax: 305-696-0461 |
About Us | Contact Us | Our Policies | FAQ | Manufactures | Links | Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. 3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com |
Linear AM-KP Remote Exterior Keypad The Model AM-KP keypad is designed for use with Linear's access control systems. The keypad is housed in a rugged cast aluminum enclosure. The die-cast keys have bright, easy-to-read yellow graphics. Each key has a positive tactile click feel when pressed. An internal sounder signals when a key is pressed. The keypad can be mounted to a pedestal or directly to a wall. A keylock secures the keypad to the mounting backplate. Remote exterior keypad PBUS accessory, surface or gooseneck mount, two status indicators, keypad lighting, compatible with AM & AE series access controllers only Manual Spec Sheet |
Linear AM-KP Remote Exterior Keypad This wired keypad (Model AM-KP) is an outdoor entry device that activates one relay channel.When a learned one-to-eight-digit access code is entered, the AM-KP causes a Linear access controller to activate one of its four relays, which in turn, performs an action, such as releasing a door strike/magnetic lock or triggering a gate operator. The keypad is built for extended service in tough commercial access control environments, outdoors or inside. It is housed in a weather-resistant, cast aluminum case.A built-in piezo sounder provides audible confirmation to the user when a key is pressed.A red LED indicates “power” and switches to green when a valid entry code is entered.A separate yellow LED illuminates when the keypad is locked out. Lockout can be programmed to occur after one to seven unsuccessful entry code attempts and will remain in that condition for one full minute. A built-in downlight provides keypad illumination in even the darkest conditions. It is completely programmable: on all the time or timed intervals.The keypad is powered by a system controller and can be located up to 500 feet away.A local external 12 Vdc power supply is also available.A keylock secures the keypad to the mounting backplate. General Specifications Materials: cast aluminum housing with stainless steel faceplate and keys Colors: black housing, stainless steel faceplate and keys, yellow keypad lettering Size: 4 in L x 3 in W x 5.25 in H (102 x 76 x 133 mm) Mounting: backplate secured to keypad via keylock Wiring: six-wire cable Operating Temperature: -22° to +155°F (-30° to +70°C) Wiring: up to 300 feet, BELDEN 9931 (24 AWG); up to 500 feet,WEICO 9405 or equivalent (20 AWG) For use outdoors or indoors 1-to-8-digit user selectable access codes Programmable downlighting Separate LEDs for "power/access granted" and "locked out" indication Pedestal or wall mounting Cast aluminum, environmentally protected housing Keylock secures keypad to mounting backplate 4" W x 5.5" H x 3" D Product Number: ACO00520 |
|
BFT Cell Phone Entry with Keypad up to 1000 User -- Open Your Gate From any where in the world Click here |