|PowerMaster SBG ART P1500 Barrier
|PowerMaster SBG P1500 Arm Barrier Openers or Barrier Operators
sheet steel, of not less than 12 gauge. All seams to be electric bead welded. Paint finish shall be baked enamel over primer.
Motor to be 1/2 HP, 115 Vac, 1Ø, reversing duty type. Motor shall be instantly reversible with built in overload protection. Motor shall be resiliently
mounted for quiet operation.
Gearbox to consist of a bronze worm gear in oil bath running in roller bearings. A torque limiting clutch shall be provided on gearbox to prevent
overloading of drive mechanism. A secondary reduction shaft shall directly operate limit switches.
Secondary shaft shall be driven by heavy duty #50 roller chain and sprockets. Final drive shaft shall be minimum 1-1/4" diameter steel supported by
heavy duty roller bearings.
Electrical assembly shall consist of a full voltage across the line motor controller. A transformer shall be provided to provide control circuit power
auxiliary control equipment. Control circuit to be class II, not to exceed 24 volts. Control circuit to provide for full functions and to accept radio
controls, loop detectors, auto close timers and all types of access controls without additional modifications. Special loop detector control circuit
shall be provided that allows for various control functions without the need for specialized detectors. A pre-wired terminal strip shall be provided for
An on/off power-switch and an open/close switch shall be provided on operator control panel for local operation and set-up.
Gate consists of an articulating arm for garages with low clearances.
PowerMaster SBG P1500 Barrier Electrical Specifications:
Instant Reversing, Continuous Duty Motor, with Overload Protection
24V Control Circuit
Heavy Duty, Across the Line, Motor Controller
On/Off Power Switch
Open/Close Switch on Control Panel
Pre-wired to Accept Radio Controls, Reversing Equipment, Loop Detector Systems, Automatic Closing Timers, 7 Day Timers and Standard Control
PowerMaster SBG P1500 Barrier Mechanical Specifications:
Single Gate Arms to 14'
12 Gauge Enclosure with Lockable Cover
45:1 Gear Reducer (Oil Bath Type)
Double Shaft Reduction System with #50 Chain and Sprockets and Roller Bearing Pillow Blocks
Adjustable Torque Limiting Clutch
Positive Cam Actuated Limit Switches
|CLICK HERE TO PURCHASE OR VIEW COMPLETE SELECTION OF POWERMASTER GATE
OPENERS AND ACCSSORIES
|About Us | Contact Us | Our Policies | FAQ | Manufactures | Links |
Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be
reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written
consent of L. A. Ornamental & Rack Corp.
3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com
|L. A. Ornamental & Rack Corp
3708 NW 82nd Street
Miami, Florida 33147