Power Master makes several choices of Swing gate openers Residential,Heavy Duty Residential Light Duty Commercial and Commercial Swing Operators |
|
PowerMaster SG-2004 Sliding Gate Openers are available from Half Horse Power to 2 Horse Power 1Phase OR 3 Phase |
CLICK HERE TO PURCHASE OR VIEW COMPLETE SELECTION OF POWERMASTER GATE OPENERS AND ACCSSORIES |
L. A. Ornamental & Rack Corp 3708 NW 82nd Street Miami, Florida 33147 Office: 305-696-0419 Fax: 305-696-0461 |
|
|
About Us | Contact Us | Our Policies | FAQ | Manufactures | Links | Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. 3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com |
|
reducer. Final reduction and drive chain to be #50 or larger roller chain. Output shafts minimum 1" diameter, supported by sealed rolller bearings. Provide adjustable torque limiting clutch and solenoid operated brake. Mechanical disconnect by means of lockable handle to allow manual operation. Adjustable limit switches of the positive chain driven type. A spring set, solenoid released, double shoe brake shall be provided to prevent gate from coasting. Motor to be high starting torque, industrial type, removable without affecting limit switch settings, and shall incorporate thermal overload protection. The motor controller shall be a full voltage, across-the-line, mechanically interlocked reversing contactor. The Control circuit shall be 24 VAC and shall include a maximum run timer to limit run time to 90 seconds or less, a 1.5 second delay on reverse to reduce shock loads on gate and provisions for all types of obstruction sensing devices. A clearly marked, thermal strip shall be provided for all field connections. The control shall have provisions for connecting; 3 button stations, single button stations, radio controls, loop detectors and automatic closing timer without additional changes. The operator must be field convertible from right hand to left hand and for use as a single, master or slave without additional parts or modifications. An on/off switch will be provided to disconnect power at electrical enclosure. The operator stand shall be heavy gauge steel, primed and painted to resist corrosion with provisions for mounting to concrete pad. The weather proof cover shall have a lockable hinged cover for access to control equipment. Electrical Specifications: High Starting Torque Motor Full Overload Protection 24 Vac Control Circuit Heavy Duty, Full Voltage Reversing Contactor 3 Button NEMA 1 Control Station Included On/Off Power Switch Left/Right Direction Plug Pre-wired to Accept Radio Control, 3 Button Station, 1 Button Station, Loop Detectors, Automatic Reversing Equipment and all Types of Access Controls Easily Field Converted to Master/Slave (Two Operators Required) Delay on Reverse Wiring is Standard Maximum Run Timer Mechanical Specifications: For Use on Commercial or Industrial Slide Gates up to 50' Wide or 2000 lbs. Max. 45:1 Gear Reducer (Oil Bath Type) Positive Chain Driven Rotary Limit Switch Gate Driven by #50 Heavy Duty Roller Chain, Included 1" Drive Shaft Supported by Roller Bearing Pillow Blocks Adjustable Torque Limiting Clutch Electric Solenoid Operated, Double Shoe Brake Manual Disconnect Provided Steel All Weather Hinged Enclosure w/Lock |