|L. A. Ornamental & Rack
Corp3708 NW 82nd Street
Miami, Florida 33147
|The Mega Arm and Mega Arm Tower are DC-powered additions to the LiftMaster® family of gate operators. Designed with a 24V DC (1/2 HP equivalent)
motor, these models provide exceptional starting torque and continuous operation, making them ideal for most applications. Constructed with an
aluminum alloy chassis, they´re corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports 6,000 cycles
per day with an operator speed of 2.5 seconds to open or close.
No power? No problem!
Built-in battery backup provides seamless operation of the gate operator and all DC control and sensing devices in the event of a power loss.
2-Year Warranty electronics and mechanism
10-Year Warranty chassis and cover
Radio Receiver Built-in
Aluminum Alloy Chassis
Built-in Battery Backup
DC Operator System
Right or Left-Handed Operation
Inherent Obstruction Sensing
Dual Gate Operation
Timer to Close
* Reverse Cabinet Modification
* Articulated Arms: For use in parking garages where normal arms would be obstructed by ceiling or other
obstacles. Available in both wood and PVC construction.
* 12 Foot Wood Arms Standard arm used in most applications
* 10 & 15 Foot PVC Arms Replaces the standard wood arm with a lighter weight PVC arm.
* Thermostatically Controlled Heater For use in extreme cold environments.
* Single-Button Radio Modification Allows you to use a radio control to both open and close the barrier arm.
|LiftMaster Mega Arm MADCBB Barrier Parking Gate Openers Commercial Operators
* Operator speed - Opening time: 2.5 seconds
* Power - 110/220 VAC, Single phase - 60 Hz
* Operator weight - 350 pounds
* Accessory power - One - 24 VAC
* Gear Reduction: 60:1 wormgear reducer in oil
* Motor: 1/2 HP continuous duty
* Metal Frame: 11-gauge pre-galvanized steel
* MBAT - Replacement Battery (1) 12V 7-amp battery - (2 required per operator)
* MA021 - (reg) Nylon arm nuts
* MA021A - (thin) Replacement 5/16" nylon nuts (pkg of 50)
* MA031 - Adapter collars for padded arm to fit gate arm bracket (2 included) UPS $12.40/SET $9.00 * SamsKit - Includes
required relay and limits. Provides Sequenced Access Management functionality between Mega Arm Operator or of the
following gate operators: SL3000, CSW200, Mega Series operators
* MA024 - 12' x 3" aluminum arm
* MA025 - 12' x 4" diameter round padded arm - yellow - Requires adapter collars (MA031)
* MA028 - 14' x 4" diameter round padded arm - yellow - Requires adapter collars (MA031)
* MA116 - 15' x 3" aluminum gate arm with yellow/black stripes. Additional counterweight required
* MA117 - Counterweight required for all 15' gate arms
* MA034 - 9' articulating PVC (folding) arm with hardware kit
* MA033 - Hardware kit only
* MA035 - 9' PVC arm only
* MA024-10 - 10' articulating aluminum (folding) arm without hardware kit with yellow/black stripes
* MA201 - Heater option, 150 Watt with thermostat Use for 32°F and below temperatures
|LiftMaster Mega Arm MADCBB Barrier Parking Gate
Openers Commercial Operators
|About Us | Contact Us | Our Policies | FAQ | Manufactures | Links |
Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form
or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp.
3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com
Liftmaster SAMSKIT, Includes Required Relay and Outputs -- Click the Add to Cart for Special Pricing -- To Low to AdvertiseProvides Sequenced Access Management functionality between and Mega Arm Operator or of the following gate operators: SL3000, CSW200, Mega Series operators