|L. A. Ornamental & Rack Corp
3708 NW 82nd Street
Miami, Florida 33147
|EDI Vehicle Detector -- Eberle Design Inc.
The front panel 7-segment LED DEFLECTOMETERTM provides visual feedback and assistance for setting the correct
sensitivity, reading the frequency of the loop, reporting Loop Faults, and indicating Delay & Extension Timing functions.
With a typical size vehicle over the roadway loop, the DEFLECTOMETERTM functions as a Sensitivity Meter. The
optimum sensitivity setting should provide a reading of “5”. You can adjust the DEFLECTOMETERTM reading by using
the front panel UP or DOWN sensitivity buttons. Automatic quantitative feedback of the loop system operation ensures
that the detector is set to the most optimum sensitivity level to detect ALL vehicles, including motorcycles and high-bed
Following power-up or reset, the DEFLECTOMETERTM will indicate a 2 or 3 digit number (quickly flashes) that indicates
the loop frequency of the loop & loop network. Keeping your loops separated by at least 5 KHz avoids crosstalk
problems and future service calls.
Ten (10) Levels of Sensitivity:
10 levels of sensitivity (0 to 9) can be easily set using the UP or DOWN push buttons.
One Model Covers ALL Low Voltages:
LMA-1800 operates on 12VDC, 24VDC, and 24VAC
Advanced Loop Diagnostics:
The Loop Fault Monitor continually checks the integrity of the loops and will report and store 3 types of loop faults;
Open Loops, Shorted Loops, and 25% sudden changes in inductance.
Loop Fault Memory:
The Loop Fault Memory uses internal Non-Volatile memory to store and display the current and previous loop faults
utilizing the front panel “Loop Fault” LED and DEFLECTOMETERTM. A power loss or reset will not delete this memory. A
MUST FOR TROUBLESHOOTING!
Call Output Memory:
The detector will not drop a Call state if power is lost for a minimum of 4 seconds or less.
2 Second Delayed Detection:
A 2-second CALL delay time can be provided via the program DIP switch.
|Eberle Design, Inc. (EDI) provides access professionals
with reliable, high quality mission critical vehicle
detection products that will improve the performance and
lifecycle of your access control systems.
EDI’s wide range of vehicle detection products help
technicians save valuable time and maximize profits by
quickly installing, accurately trouble-shooting, and reliably
maintaining access control systems with easy to use hi-
tech vehicle detectors that provide built-in set-up tools,
frequency & sensitivity meters, and non-volatile
diagnostic history, all of which are valuable and always
available – Because they’re built-in!
|Single channel with dual programmable solid state outputs. Printed circuit board (pcb) mounted. The DEFLECTOMETER
display helps optimize the proper sensitivity setting to detect all vehicles including motorcycles. NO MORE GUESS
WORK WHEN SETTING SENSITIVITY OR FREQUENCY!
Plug Compatible with the following Operators:
* All Linear Operators with APeX controller
* Advanced Access Automation/FAAC CSL2000, CSW2000, RSW1000
* All-O-Matic SL100-DC
* Chamberlain/Elite SL3000, CSW200
* Intelligate Systems IQ500, IQ5000
* SECOM Late model operators with 10-pin Molex connectors
* Rotary Gate Systems SL1000R, SL1000C, SL1000I
* TyMetal TYM 1000 , TYM 2000
* Viking Access Models L-3, F-1, T-21, H-10, B-12, Q-4
|Loop detectors and loops may be used for a variety of applications. Vehicle loop detectors are frequently used to provide free
entrance and/or free exit for traffic. Wire loop detector directly to gate operator or overhead door, connect to buried loop, and allow
larger metal objects which drive over loop to trigger the gate or door to open, or close. Loops remain practically invisible, buried
beneath gravel, asphalt, or concrete driveways. Vehicle loop detectors are a safe and reliable way of controlling an assortment of
equipment. Safety Devices for Automated Gates and Doors: Vehicle loops and loop detectors are also frequently used as safety
devices. Loop detectors are wired directly to the gate operator or overhead door. Loops are buried directly under the automated
gate or door. When a vehicle, or other large metal device, is present, a signal is sent preventing the automated gate or door from
moving. Use vehicle loop detectors and loops in conjunction with other safety devices
|**HAS BEEN REPLACED BY LMA-1800, IF
ORDERED, LMA-1800 WILL BE SHIPPED**
|EDI Loop Detectors
|Diablo Loop Detectors
|Reno Loop Detectors
|EMX Loop Detectors