L. A. Ornamental & Rack Corp 3708 NW 82nd Street Miami, Florida 33147 Office: 305-696-0419 Fax: 305-696-0461 |
About Us | Contact Us | Our Policies | FAQ | Manufactures | Links | Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. 3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com |
EMX D-TEK ULTRA Plug-in Style Vehicle Loop Detector |
EMX D-TEK ULTRA Plug-in Style Vehicle Loop Detector The Ultra D-TEK was designed to be plug-in compatible with Elite’s OmniControl™ board operators such as the Elite SL3000 and Elite CSW200. The Ultra D-TEK is now compatible with the Viking Loop Detector Rack. The Ultra D-TEK may be used in the Center, Safety and Exit slots on the operator control board. Sensitivity selection is simplified by the ULTRAMETER™ display that indicates the appropriate sensitivity setting to detect the vehicle positioned on the loop. The 10 sensitivity settings allow for finer adjustment of the detection level, while the 4 frequency settings provide greater flexibility in preventing crosstalk in multi-loop applications. Benefits include: Compact design Energy efficient Easy to install and setup Reliable Cost effective EMX D-TEK ULTRA Plug-in Style Vehicle Loop Detector Features ULTRAMETER™ (displays optimum sensitivity setting / crosstalk interference) Frequency count/reset switch 10 sensitivity settings Loop diagnostics 4 operating frequencies Lightning and surge protection Loop fail output Frequency counter ASB (Automatic Sensitivity Boost) Filter EMX D-TEK ULTRA Plug-in Style Vehicle Loop Detector Features Power supply 9-30 VDC (reverse polarity protected) Current draw 18 mA max. Dimensions L= 3.0in (76mm) W= 0.9in (22mm) H= 2.75in (70mm) Weight 0.15 lbs. (68g) Loop Inductance 20…2000μH (Q factor > 5) Environmental tracking Automatic Compensation Operating environment -40o C…82o C (-40oF…180o F) 0…95% relative humidity Housing material PVC (Green) Connection 10 Pin Female Loop Compensation Isolation transformer allows operation with poor quality loops Loop Frequency 4 settings (low, med-low, med-hi, high) Surge Protection Loop circuitry protected by surge suppressors ULTRAMETERTM Display Indicates optimum sensitivity level, 0-9 Diagnostic aid Loop Output Low on Detect Power / loop fault indicator Green LED Detect / frequency count indicator Red LED External reset input Low to reset Filter Prevents detection from cross-traffic or RF interference (i.e. keying radio transmitter) Sensitivity 10 levels 0-9 ASB (Automatic Sensitivity Boost) Increases sensitivity after initial detection to prevent dropout due to high bed vehicles |
The ULTRAMETERTM display makes installation, set-up and troubleshooting easy. Each time a vehicle is moved onto the loop, the display indicates the sensitivity necessary to detect vehicle. Simply set the sensitivity to the value displayed to detect the vehicle. Interference or crosstalk from adjacent loops or other sources are displayed as a constantly varying number on the ULTRAMETERTM. This condition may be avoided by maintaining a minimum of 5 kHz separation in multi-loop applications. |
|
Please Choose a Lite Performed Loop if looking for a Complete Kit |
|
Diablo Loop Detectors |
EDI Loop Detectors |
Reno Loop Detectors |
EMX Loop Detectors |
Preform Loops |