L. A. Ornamental & Rack Corp 3708 NW 82nd Street Miami, Florida 33147 Office: 305-696-0419 Fax: 305-696-0461 |
About Us | Contact Us | Our Policies | FAQ | Manufactures | Links | Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. 3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail: LAOrnamental@Aol.com |
EMX D-Tek Loop Detector Box |
EMX D_TEK Loop Detector POWER: The detector is available in the following voltages, 12V AC/DC, 24V AC, 24V DC, 110V AC, 220V AC. Maximum current draw 100mA LOW POWER Detector is available with maximum current draw of 60mA TEMPERATURE: -40F to + 180F ENVIRONMENTAL PROTECTION: Circuit board is conformally coated ENCLOSURE: Extruded anodized aluminum, Height = 3.25 inches 83 mm – Width = 2.56 inches 40 mm – Depth = 3.65 inches 90 mm OUTPUT RELAYS: 5A/125 V AC standard version, 1A/125 V AC low current version CONNECTOR: 86CP11 compatible with 11pin Octal DIN rail mountable socket or wire harness SURGE PROTECTION: The detector is protected with neon discharge lamps, zenner diods and surge arrestors LOOP INPUT: Transformer isolated GROUNDED LOOP: The loop isolation transformer allows operation with poor quality loops LOOP INDUCTANCE RANGE: 20 to 2000 microhenries with Q factor of 5 or higher TUNING: Detector automatically tunes to the loop after power application or reset TRACKING: Detector automatically tracks and compensates for environmental changes POWER INDICATOR: Green LED solid light indicates power LOOP FAILURE INDICATOR: Green LED blinks indicates loop problem LOOP FAILURE MEMORY: Green LED blinks with fast consecutive blinks indicates past loop problem that healed DETECT INDICATOR: Red LED solid light indicates detection EXTEND INDICATOR: Red LED blinks after a car left the loop indicates time extend feature SENSITIVITY: Is set by 10 position rotary switch FREQUENCY: Is set three position toggle switch INFINITE PRESENCE MODE: DIP switch selectable presence LIMITED 4 MINUTES: DIP switch selectable presence PRESENCE TIME: DIP switch selectable SECOND PRESENCE RELAY: DIP switch selectable PULSE ON EXIT / ENTRY: DIP switch selectable FAIL SAFE / SECURE: DIP switch selectable FILTER: DIP switch selectable 2 seconds EXTENDED DETECTION: DIP switch selectable 3, 6 and 9 seconds |
EMX D TEK Loop Detector Features Loop diagnostics Loop isolation transformer Loop conditioner Aluminum RF shield housing Loop frequency counter 10 gold plated sensitivity controls 8 gold plated function controls 6 gold plated controls for frequency, reset & frequency counter 2 high intensity LED indicators 2 relays pulse or presence |
The D-TEK vehicle loop detector was designed for easy installation and operation. It provides maximum surge protection on all inputs and outputs of the detector. Benefits include: Easy installation Works with small operator housings Operates reliably with marginal loops Metal housing provides maximum durability and RF blocking Array of features and controls supports variety of applications. Surge protection |
|
|
Diablo Loop Detectors |
EDI Loop Detectors |
Reno Loop Detectors |
EMX Loop Detectors |
Preform Loops |