|L. A. Ornamental & Rack Corp
3708 NW 82nd Street
Miami, Florida 33147
|About Us | Contact Us | Our Policies | FAQ | Manufactures | Links |
Copyright Protected 2004-2008 - L. A. Ornamental & Rack Corp. All rights reserved. No part of this site can be
reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior
written consent of L. A. Ornamental & Rack Corp.
3708 NW 82nd Street Miami Florida 33147, Office: 305-696-0419 Fax: 305-696-0461 E-Mail:
|American Access System 23-206/KP or 23-206/KPS
The PROXPAD is a combination of two separate units, the 23-206 proximity reader and the 26-100 keypad in one
housing. The outputs can be wired together allowing the units to work as one or they can be left separate
providing two units in one enclosure.
The PROXPAD proximity card reader unit is a high quality, programmable, commercial, digital key, control
station. The unit incorporates an interface for one remote wiegand card readers as well as an interface for a
serial printer. The PROXPAD’s card reader unit also employs a history buffer which stores up to 1000 card
reader transactions. A true Anti-passback feature is also provided for the end user. The unit incorporates 2
relays on the circuit board. The relay outputs can be programmed in 1 of 2 ways:
* All proximity cards entered into the system will operate relay A (Default setting).
* All proximity cards entered on PROX 1 will operate relay A, and all cards entered on PROX 2 will
operate relay B (SPLIT RELAY FEATURE).
The relay output times are user selectable from 1/2 to 9 seconds and provide a normally open (N/O)
and normally closed (N/C) output. Make sure to read and understand all instructions before proceeding
with each step.
PROXPAD keypad unit is a 100 code, fully programmable, commercial, digital key station
What do you get when you combine the latest in proximity technology with a proven keypad? The American
Access Systems, Inc ProxPad system! This model is built for years of trouble free use by utilizing a rugged,
heavy metal, black powder coated enclosure and high grade stainless steel faceplate.
The ProxPad can be conveniently configured for use as a stand alone system, or as a remote slave system that
can hook up to almost any 26 bit weigand controller (including the AAS ProAccess 200 computer controller).
Each ProxPad unit can further be setup to use the prox reader and keypad independently of each other, or to
use them in conjunction, allowing for higher security by utilizing both card reader and pin code to fire the relay.
The AAS ProxPad is the ideal choice for any application in which a proximity reader and keypad are needed for
additional security or just for dual modes of entry. With the stand alone system, there is even an optional
printer that can record the entry times and dates of all prox card users.
Input: 16.5VAC (adapter included)
Output: prox - n/o or n/c contact 1-99 seconds
keypad – n/o or n/c contact 1-9 seconds
Operating temperature: -15 to 175 Fahrenheit
Dimensions: 6.54” H x 5.50” W x 4.25”D
Relay Specs - Proximity DC Load AC Load
Contact Rating 1A @ 24V .5A @ 120V
Max. switching voltage 150V 220V
Max. carrying current 2A 2A
Max. switching power 28W 60VA
|BFT Cell Phone Entry with
Keypad up to 1000 User --
Open Your Gate From any
where in the world Click here